Bitumen Cutback SC250 is a slow curing cutback bitumen that contains 60% bitumen, is black in color and is manufactured strictly as per ASTM D 2026M-15 standard.
Application of Bitumen Cutback SC250
Cutback bitumen SC250 consist of initial incorporation of asphalt into the surface of non-asphalt based course preparatory to any superimposed treatment of construction.
The cutback asphalt SC-250 applying to waterproofing of surfaces plug capillary voids, coat and bond loose mineral particles.
Bitumen SC250 Specification
Kiapetro guarantees that the Bitumen Cutback SC250 is produced in compliance and conformity to International of Standard ASTM/EN15322:2009, also meets the requirements of the following specification.
|
Properties |
Min |
Max |
Test Method |
|
Kinematic viscosity at 60°C [140°F], mm2/s |
250 |
500 |
ASTM D2170 |
|
Flash Point (Cleveland open cup), °C |
60 |
– |
ASTM D92 |
|
Distillate test: |
|||
|
Total distillate to 360°C (680°F), volume % |
– |
25 |
ASTM D402 |
|
Solubility, % |
95 |
– |
ASTM D2042 |
|
Kinematic viscosity on distillation residue at 60°C (140°F), mm2/s |
400 |
10000 |
ASTM D2170 |
|
Asphalt residue: |
|||
|
Residue of 100 penetration, % |
50 |
– |
ASTM D243 |
|
Ductility 100 penetration residue at 25°C (77°F), cm |
50 |
– |
ASTM D113 |
|
Water, % |
– |
0.5 |
ASTM D95 |
No comment