Cutback RC800

Cutback bitumen RC800 is dissolved of bitumen in solvents of Naphtha. Petroleum solvents such as naphtha, kerosene, etc. are cutback agents which can reduce the viscosity of the bitumen. As well as improving the ability to coat aggregates.

 

Application of Bitumen Cutback RC800

Cutback bitumen RC800 consist of initial incorporation of asphalt into the surface of non-asphalt based course preparatory to any superimposed treatment of construction.

The cutback asphalt RC800 applying to waterproofing of surfaces, plug capillary voids, coat and bond loose mineral particles.

 

Bitumen RC800 Specification

Kiapetro guarantees that the Bitumen Cutback RC800 is produced in compliance and conformity to International of Standard ASTM/EN15322:2009, also meets the requirements of the following specification.

 

Properties	Min	Max	Test Method
Kinematic viscosity at 60°C [140°F], mm2/s	800	1600	ASTM D2170
Flash Point (Tag open-cup), °C	–	27	ASTM D3143
Distillation test: Distillate, volume percent of total distillate to 360°C:
to 190°C [374°F]	–	–	ASTM D402
To 225°C [437°F]	15	–	ASTM D402
To 260°C [500°F]	45	–	ASTM D402
To 316°C [600°F]	75	–	ASTM D402
Residue from distillation to 360°C [680°F], percent volume by difference	75	–	ASTM D402
Tests on residue from distillation:
Penetration at 25°C	80	120	ASTM D5
Ductility at 25°C [77°F], cm	100	–	ASTM D113
Solubility in trichloroethylene, %	99.0	–	ASTM D2042
Water, %	–	0.2	ASTM D95