Bitumen cutback MC800 is a cutback bitumen which is a penetration bitumen asphalt blended with kerosene. Cutback bitumen MC-800 consist of initial incorporation of asphalt into the surface of non-asphalt based course preparatory to any superimposed treatment of construction.
Application of Bitumen Cutback MC800
The main application of MC-800 cutback is prime sealing, prime coating and manufacturing of asphalt pre-mix and used for maintenance of the road. Due to their lower viscosity medium caring cutback bituminous asphalt is proper for cold weather condition. medium curing cutback petroleum asphalt supplied by bitumen supply manufacturing from vacuum distillation of crude oil blended with a petroleum solvent.
Bitumen MC800 Specification
Kiapetro guarantees that the Bitumen Cutback mc800 is produced in compliance and conformity to International of Standard ASTM/EN15322:2009, also meets the requirements of the following specification.
|
Bitumen MC 800 |
||
|
Characteristic |
Value |
Test Method |
|
Kinematic Viscosity@ 60°C (cSt) |
800-1600 |
ASTM D-2170 |
|
Flash Point (top open cuo) (°C) |
66 min |
ASTM D-3143 |
|
Water Content (%vol) |
0.2 max |
ASTM D-95 |
|
Distillate, %volume of total distillate to @ 360°C: |
||
|
to 225°C |
___ |
ASTM D-402 |
|
to 260°C |
0-35 |
|
|
to 316°C |
45-80 |
|
|
Residue from Distillation to 360°C (%Vol by difference) |
75 min |
ASTM D-402 |
|
Test on Residue from Distillation |
||
|
Penetration @ 25°C (dmm) |
120-250 |
ASTM D-5 |
|
Ductility @ 25°C (cm) |
100 min |
ASTM D-113 |
|
solubility in Trichloroethylene (%wt) |
99 min |
ASTM D-2042 |
No comment