Bitumen cutback MC70 is medium curing (MC) cut-back asphalt consisting of penetration grade asphalt cement and diluents or cutter of medium volatility. Cutback MC-70 use in the road maintenance industry where it is used as a prime coat of the base course prior to placing the bituminous surface course.
The diluents temporarily reduce the viscosity of the asphalt cement for ease of handling and application.
Application of Bitumen Cutback MC70
Cutback bitumen MC70 consist of initial incorporation of asphalt into the surface of non-asphalt based course preparatory to any superimposed treatment of construction.
The cutback asphalt MC70 applying to waterproofing of surfaces, plug capillary voids, coat and bond loose mineral particles.
Bitumen MC70 Specification
Kiapetro guarantees that the Bitumen Cutback mc70 is produced in compliance and conformity to International of Standard ASTM/EN15322:2009, also meets the requirements of the following specification.
Bitumen MC 70 |
||
Characteristic |
Value |
Test Method |
Kinematic Viscosity@ 60°C (cSt) |
70-140 |
ASTM D-2170 |
Flash Point (top open cuo) (°C) |
38 min |
ASTM D-3143 |
Water Content (%vol) |
0.2 max |
ASTM D-95 |
Distillate, %volume of total distillate to @ 360°C: |
||
to 225°C |
20 max |
ASTM D-402 |
to 260°C |
20-60 |
|
to 316°C |
65-90 |
|
Residue from Distillation to 360°C (%Vol by difference) |
55 min |
ASTM D-402 |
Test on Residue from Distillation |
||
Penetration @ 25°C (dmm) |
120-250 |
ASTM D-5 |
Ductility @ 25°C (cm) |
100 min |
ASTM D-113 |
solubility in Trichloroethylene (%wt) |
99 min |
ASTM D-2042 |