Anionic Bitumen emulsion SS-1 is slow-setting, anionic type and are further characterized by their ability to remain stable on storage although produced with equipment that generates a wide range of shearing forces.
Such characteristics are imparted to the asphalt emulsions through the use of emulsion-conditioner compositions comprising a partially desulfonated lignosulfonate, preferably an anionic or nonionic emulsifying agent and, optionally, a thicken.
Application of Bitumen Emulsion SS1
Usage of anionic bitumen emulsion SS-1 is two phases of water and bitumen which are not possible to mix and the first interphase is inside of outer phase. The particle size of the emulsion is 0.1 to 5 micron. In normal conditions and without emulsifier the two parts of emulsion SS1 is unstable and quickly will segregate. By adding emulsifier into water and bitumen that is the alkaline salt with Ammonium Salt in the high-speed mixer at ISO condition making bitumen SS1.
Bitumen Emulsion SS-1 Specification
Kiapetro guarantees that the Bitumen Emulsion SS1 is produced in compliance and conformity to International of Standard ASTM D 2397M, also meets the requirements of the following specification.
PROPETRY | MIN | MAX | TEST METHOD |
Viscosity SSF , 25 °C (s) | 20 | 100 | ASTM D244 |
Viscosity SSF , 50 °C (s) | — | — | ASTM D244 |
Storage stability, 24h (%) | — | 1 | ASTM D6930 |
Demulcibility , 0.02 N CaCl2 (%) | — | — | |
Cement mixing (%) | — | 2 | |
Sieve (%) | — | 0.1 | ASTM D6933 |
Residue (%) | 57 | — | ASTM-D244 |
Solubility in trichloroethylene % | 97.5 | ASTM D2042 | |
Penetration 77°F (25°C) 100g,5s mm | 100 | 200 | ASTM D5 |
ductility, 77°F (25 °C), 5cm/min (cm) | 40 | ASTM D113 |