Emulsion bitumen CSS-1 is a cationic emulsion. Bitumen emulsion CSS-1 are usually made by passing the mixture of hot bitumen and water phase between a rotating disc, cone or wheel and a stator.
Asphalt Emulsion CSS1 is a cationic slow setting bitumen emulsion that contains 57% bitumen, is black in color and is manufactured strictly as per ASTM D 2397M-13 standard.
Application of Bitumen Emulsion CSS-1
Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with the cutback and can be applied in a wider range of conditions. Most CSS-1 applications are mulching, Prepared cold Mixed Asphalt, Prime Coat and Fog Seal or Seal Coat
Bitumen Emulsion CSS1 Specification
Kiapetro guarantees that the Bitumen Emulsion CSS1 is produced in compliance and conformity to International of Standard ASTM D 2397M-13, also meets the requirements of the following specification.
|
Property |
Min |
Max |
Test Method |
|
Viscosity, Saybolt Furol at 25°C, SFS |
20 |
100 |
ASTM D7496 |
|
Storage stability test, 24-h, % |
- |
1 |
ASTM D6930 |
|
Demulsibility, 35mL, 0.8% dioctyl sodium sulfosuccinate, % |
- |
- |
ASTM D6936 |
|
Coating ability and water resistance: |
|||
|
Particle charge test |
positive |
positive |
ASTM D7402 |
|
Sieve test, % |
- |
0.1 |
ASTM D6933 |
|
Cement mixing test,% |
- |
2.0 |
ASTM D6935 |
|
Distillation: |
|||
|
Oil distillate, by volume of emulsion, % |
- |
- |
ASTM D6997 |
|
Residue, % |
57 |
- |
ASTM D6997 |
|
Tests on residue from distillation test: |
|||
|
Penetration, 25°C (77°F), 100g, 5s |
100 |
250 |
ASTM D5 |
|
Ductility, 25°C (77°F), 5cm/min, cm |
40 |
- |
ASTM D113 |
|
Solubility in trichloroethylene, % |
97.5 |
- |
ASTM D2042 |