Bitumen Emulsion CRS1 is a cationic emulsion. Bitumen Emulsion CRS-1 are usually made by passing the mixture of hot bitumen and water phase between a rotating disc, cone or wheel and a stator.
In the emulsification process, the hot binder is mechanically separated into minute globules and dispersed in water treated with a small quantity of emulsifying agent. The water is called the continuous phase and the globules of the binder are called the discontinuous phase.by proper selection of an emulsifying agent and other manufacturing controls.
Application of Bitumen Emulsion CRS-1
Bitumen emulsion CRS1 applications are:
- Single surface treatment
- Multiple surface treatment
- Sand seal
Bitumen Emulsion CRS1 Specification
Kiapetro guarantees that the Bitumen Emulsion CRS-1 is produced in compliance and conformity to International of Standard ASTM D 2397M-13, also meets the requirements of the following specification.
|
Property |
Min |
Max |
Test Method |
|
Viscosity, Saybolt Furol at 50°C, SFS |
20 |
100 |
ASTM D7496 |
|
Storage stability test, 24-h, % |
- |
1 |
ASTM D6930 |
|
Demulsibility, 35mL, 0.8% dioctyl sodium sulfosuccinate, % |
40 |
- |
ASTM D6936 |
|
Coating ability and water resistance: |
|||
|
Particle charge test |
positive |
positive |
ASTM D7402 |
|
Sieve test, % |
- |
0.1 |
ASTM D6933 |
|
Distillation: |
|||
|
Oil distillate, by volume of emulsion, % |
- |
3 |
ASTM D6997 |
|
Residue, % |
60 |
- |
ASTM D6997 |
|
Tests on residue from distillation test: |
|||
|
Penetration, 25°C (77°F), 100g, 5s |
100 |
250 |
ASTM D5 |
|
Ductility, 25°C (77°F), 5cm/min, cm |
40 |
- |
ASTM D113 |
|
Solubility in trichloroethylene, % |
97.5 |
- |
ASTM D2042 |